Rubber and Silicone Tubing
Accuflow Systems Sani-Tech Peristaltic Tubing, Platinum Silicone, 0.250 ID, 0.375 OD
Sani-Tech SPT-60L peristaltic pump tubing is a platinum-cured silicone tubing engineered for pharmaceutical final-fill and precision peristaltic pumping. It delivers low spallation, extended pump life, and accurate, consistent dispensing suitable for single-use assemblies and biopharmaceutical manufacturing.
- Platinum-cured silicone material.
- Designed for final fill and precision peristaltic pumping.
- Low spallation and extended pump life.
- 0.250 in inner diameter, 0.375 in outer diameter, 0.063 in wall thickness.
- Burst pressure approximately 64 psi (4.4 bar).
- Full extractables report and validation package available.
Accuflow Systems Saint-Gobain Tubing, Platinum Silicone, 0.188 in ID, 0.375 in OD
Saint-Gobain Sani-Tech SPT-60L peristaltic pump tubing is a platinum-cured silicone tube designed for pharmaceutical and bioprocess peristaltic pumping. It minimizes particle shedding and provides consistent dosing performance for final-fill and transfer applications while supporting common sterilization and biocompatibility requirements where specified by the manufacturer.
- Platinum-cured silicone construction.
- Inner diameter 0.188 in (4.8 mm).
- Outer diameter 0.375 in (9.5 mm).
- Wall thickness 0.094 in (2.4 mm).
- Burst pressure 113 psi (7.8 bar).
- Low spallation to extend pump life and improve fill accuracy.
- Suitable for peristaltic pump transfer and pharmaceutical final-fill applications.
- Compatible with standard sterilization methods and biocompatibility testing as specified by manufacturer documentation.
Grainger Gage Pin Set ZZ Minus 1.01mm-13.99mm
The Grainger Approved Gage Pin Set - ZZ Minus 1.01mm - 13.99mm is a precision measuring tool used to calibrate measuring instruments and check tolerances. This set contains 13 gage pins with diameters ranging from 1.01mm to 13.99mm, with each pin diameter decreasing by 1mm. The gage pins are made from hardened and ground tool steel with a tolerance of +/- .0001mm. They feature a knurled grip area and come in a fitted plastic case for storage and organization. This gage pin set provides a wide range of diameters for versatile use in calibration and precision measurement.
Grainger Pin Gage .0110 Plus Class ZZ
The Westward Pin Gage Set is a precision measuring tool used to check hole sizes and verify part dimensions. It contains 13 pin gages with diameters ranging from 0.228" to 0.244" in 0.001" increments. The gages are made from hardened and ground tool steel for durability and accuracy. They feature a knurled grip area for easy handling. This pin gage set allows for quick go/no-go checking and is suitable for use in production, inspection, and engineering applications. The set comes packaged in a plastic case for storage and organization.
Accuflow Systems Saint-Gobain Peristaltic Tubing, Platinum-Cured Silicone, 0.250/0.500 in (ID/OD)
Sani-Tech SPT-60L is a pharmaceutical-grade, platinum-cured silicone tubing engineered for high-precision fluid transfer in peristaltic pumps and final-fill operations. Controlled dimensions and low spallation deliver accurate dosing and extended pump life for biopharmaceutical manufacturing and single-use assemblies.
- Platinum-cured silicone for low extractables and bioprocess compatibility.
- 0.250 in inner diameter, 0.500 in outer diameter, 0.125 in wall thickness.
- Nominal 60 Shore A durometer for consistent pump performance.
- Engineered for low spallation and extended peristaltic pump life.
- Suitable for final-fill and peristaltic dosing applications.
- Compliance: USP <88> Class VI, USP <87>, ISO 10993-5; see datasheet for full validation details.
MSC USA Sealing ZUSA-HT-666 White Teflon PTFE Tube; 1/2" Inside Diameter, 5/8" Outside Diameter, 1/16" Wall Thickness; Maximum Working Pressure (psi): 100
USA Sealing ZUSA-HT-666 White Teflon PTFE Tube; 1/2" Inside Diameter, 5/8" Outside Diameter, 1/16" Wall Thickness; Maximum Working Pressure (psi): 100
MSC Vermont Gage Class ZZ Plus Plug Gage, 0.413 in., Tool Steel, 2.0000 in. OAL, 1 ea
This Class ZZ plug gage is designed for high-precision inspection and calibration tasks. Manufactured from high-quality tool steel, it is suited for go inspection, setting micrometers, verniers, and other measuring devices. The gage is built to perform consistently in demanding industrial environments.
- Tool steel construction with 60/65 Rc hardness for durability
- Ground to a 10 microfinish or better
- Round within 0.0001 in. (0.0025 mm)
- Tolerance of 0.000200 in.
- Includes a certificate of accuracy with NIST traceability
- Complies with ASME B89.1 standards
- Size and direction of tolerance are clearly marked